Information1

Information2
 

LMFFM3024BA: Set up, operate and maintain multi-head planing and moulding machines
Description

This unit covers the skills required to use a multi-head moulder to run a variety of profiles in either timber or manufactured boards.
What do I need to know?

You will need to have a good understanding of the background knowledge required for this competency. To see some examples of the sorts of questions that your assessor may ask you during the assessment event, click on the link below.

Remember, though, that these questions are samples only, but you can use them as a 'self check' to determine whether you think you're ready to be assessed.
 

LMFFM3024BA: Set up, operate and maintain multi-head planing and moulding machines sample questions
What do I need to demonstrate?

Below is a summary of the main skills you must possess to meet the competency requirements for this unit. Tick the box beside each skill you believe you can demonstrate now by left-clicking the mouse.

Click on the green button – Skills I have now – to see a list of the skills you may be able to apply for RPL in. The list will also show examples of the types of evidence you could use.
Click on the red button – Skills I still need to learn – to see a list of the skills you are not yet
able to demonstrate. You should talk to your trainer about receiving ‘gap’ training for these.
Skills you will need to perform for your assessor
 

Set up and operate a multi-head moulding machine to produce:  
  • square dressed timber
  • three different mouldings, with a profile on at least one face and one edge
Other skills you will need to provide evidence for
 

  • Working safely and effectively with others
  • Following instructions from your supervisor
  • Interpreting job sheets
  • Carrying out basic operator maintenance on the machine
What the competency says

To see the full unit of competency please click below:

  LMFFM3024BA: Set up, operate and maintain multi-head planing and moulding machines

For more information about the qualifications that this competency is found in and the packaging rules that apply, please refer to the Furnishing Training Package (LMF02). You will find this at the National Training Information Service website at: www.ntis.gov.au